Author Topic: Ontario Building Code Act  (Read 6555 times)

Offline Admin

  • Administrator
  • *****
  • Posts: 2030
    • HVAC TECH GROUP
Ontario Building Code Act
« on: May 07, 2012, 07:00:36 PM »
Download Ontario Building Code Act - Here

Offline Admin

  • Administrator
  • *****
  • Posts: 2030
    • HVAC TECH GROUP
Re: Ontario Building Code Act
« Reply #1 on: March 09, 2013, 01:54:31 PM »
The Ontario Building Code will be amended and come into force January 1, 2014.

The following is from O.Reg 332/12,

Quote
Note: THIS REGULATION IS NOT YET IN FORCE. It comes into force on January 1, 2014. (See: O. Reg. 332/12, Sentence 4.4.1.1.(1))

You can download the Building Code Act and O.Reg 332/12 - Here

Offline Admin

  • Administrator
  • *****
  • Posts: 2030
    • HVAC TECH GROUP
Re: Ontario Building Code Act
« Reply #2 on: March 25, 2014, 11:33:18 AM »
Read about recent changes to 2012 OBC - Here

Offline Admin

  • Administrator
  • *****
  • Posts: 2030
    • HVAC TECH GROUP
Re: Ontario Building Code Act
« Reply #3 on: July 07, 2017, 03:54:40 PM »
There have been some changes to the Building Code, which affect any permit issued after December 31, 2016.

Quote
Chapter 3 of Supplementary Standard SB-12 to the 2012 Building Code – Energy Efficiency for Housing – has been amended to include:
new prescriptive compliance packages that provide minimum 15 per cent energy efficiency improvement over existing packages
drain water heat recovery units as a mandatory requirement for all prescriptive compliance packages
heat or energy recovery ventilators as a mandatory requirement in all packages in order to protect indoor air quality as homes get increasingly “air tight”
thermal U and effective RSI values along with nominal RSI values to provide added flexibility in the choice of different assembly structures e.g. basement wall and roofs
credits for reducing air leakage to encourage better energy conservation
table to clarify requirements for developing a reference building
revised air-leakage rates for the reference building to encourage testing and improved air tightness
clarification to provide credits for renewables, dedicated ventilation systems and broader types of HVAC equipment
other editorial changes, clarifications and new appendix notes
 
The term “heat recovery ventilators” has been broadened to include energy recovery ventilators wherever it has been used in the document.
Chapter 3 changes will apply to construction for which a permit has been applied for after December 31, 2016.
There have only been minor editorial changes included in this update for Chapter 2 which will continue to apply to construction for which a permit has been applied for before January 1, 2017.

See the attached 2012 OBC and MMA Supplementary Standard SB-12.

The Supplementary Standard SB-1 Climatic and Seismic Data document will help determine if your area requires that the HVAC equipment be secured to the structure and what thickness of insulation is required on ductwork.  EG:  HRV intakes in Ottawa require R8 insulation, not the R4.2 that everyone installs.  Download it - Here