Text only | Text with Images

www.hvactechgroup.com - forums

HVAC Forums => HVAC Help => Topic started by: Catch22 on January 29, 2024, 09:40:48 PM

Title: Think I fried my control board?
Post by: Catch22 on January 29, 2024, 09:40:48 PM
Hello,
I'm new to the forum and I could use some help. I have a gas overhead garage heater and I was removing the limit switch on it and I forgot to unplug the heater, when I was removing the limit switch it sparked on the metal housing now nothing works on the heater.
Do you think I fried the control board?
The heater is a Cayenne 45000 btu.

Thanks Mike
Title: Re: Think I fried my control board?
Post by: Admin on January 29, 2024, 10:09:33 PM
I would look to see if there's a 24V fuse or test the transformer. 
Title: Re: Think I fried my control board?
Post by: Catch22 on January 30, 2024, 07:41:00 PM
Quote from: Admin on January 29, 2024, 10:09:33 PMI would look to see if there's a 24V fuse or test the transformer. 

Thanks I did and it ended up being the fuse..
Thank you...
Text only | Text with Images