Author Topic: Nutech HRV Inspection Program  (Read 3123 times)

Offline Admin

  • Administrator
  • *****
  • Posts: 2111
    • HVAC TECH GROUP
Nutech HRV Inspection Program
« on: June 01, 2007, 08:06:50 PM »
This program started October 2006, https://www.hrvinfoline.com/

Apparently those seized motors may cause fires   :-\

Quote
How can you confirm that you have an affected HRV?

HRV brands that qualify for the inspection program include Lifebreath, Tradewinds, Honeywell, Lennox, Fresh-X-Changer, American Aldes, Raydot, Standex, Sears Authorized Indoor Clean Air Services, Nutone and Airflow manufactured between 1992 to 1998 by Nutech R. Hldngs Inc.

There are 2 ways to confirm whether you have an affected HRV.

1. Serial Number
    Locate the electrical cord (Figure 1), unplug the HRV from the electrical outlet and find the date the HRV was manufactured through the serial number on the manufacturer’s name plate. Write down the serial number. Serial numbers containing the numbers 29, 39, 49, 59, 95, 96, 97, or 98 will qualify for an inspection unless the original white motor has been replaced (replacement fan motors are grey or black). Refer to the attached instructions on how to locate the serial number name plate.

2. Motor Color
    Locate the electrical cord (Figure 1), unplug the HRV from the electrical outlet and open the front access door. Note the color of the fan motor (usually located on the right side of the HRV [Figure 9]). Fan motors affected by this inspection program are white in color. If the fan motor is white, please leave the HRV unplugged, close the front access door and contact us. If the fan motor is grey or black then the HRV is not affected by this inspection program. Call our toll free number at 1-866-557-0535 if the fan motor is not visible.

To find out more…

For more information, to confirm that you have an affected HRV and to arrange for a no-charge inspection, please call our toll free number at 1-866-557-0535 and/or register on-line at www.hrvinfoline.com.