Author Topic: CAN/CSA-B149.1-05 - Ammendment FS-135-08  (Read 2934 times)

Offline Admin

  • Administrator
  • *****
  • Posts: 2370
    • HVAC TECH GROUP
CAN/CSA-B149.1-05 - Ammendment FS-135-08
« on: July 23, 2008, 04:36:45 PM »
Download the ammendment FS-135-08 - Here

Quote
The Director of Ontario Regulation 212/01 (Gaseous Fuels) pursuant of section 6 of Ontario Regulation 223/01 (Codes and Standards Adopted by Reference) hereby provides notice that the Gaseous Fuels Code Adoption Document published by the Technical Standards & Safety Authority, dated June 1, 2001 and amended on June 15, 2007, is further amended as follows:

1. Section 1.28 is revoked and the following substituted for it:

1.28 Clause 8.9.6 is revoked and the following substituted for it:
8.9.6 (a) Until October 1, 2008, vents constructed using plastic piping shall be certified to ULC S636 except for special fittings (non standard venting systems and components), which may include:
a. entire vent systems supplied with the appliance that are not comprised of standard vent sizes and components;
b. transitions with or without condensing lines; and
c. termination kits.
8.9.6 (b) After October 1, 2008, venting systems constructed using plastic piping shall be certified to ULC S636.

2. This amendment is effective immediately.

Dated at Toronto this 13th day of June, 2008.

Offline Admin

  • Administrator
  • *****
  • Posts: 2370
    • HVAC TECH GROUP
Re: CAN/CSA-B149.1-05 - Ammendment FS-135-08
« Reply #1 on: April 14, 2009, 12:39:04 PM »
You can view all ammendments and supplements - Here